streaked horizontal lines appear
on prints 296
streaked vertical lines 297
toner fog or background
shading 300
toner rubs off 301
toner specks appear on prints 300
transparency print quality is
poor 296
uneven print density 301
white streaks 299
print troubleshooting
error reading flash drive 277
held jobs do not print 279
incorrect characters print 281
incorrect margins on prints 288
jammed pages are not
reprinted 276
job prints from wrong tray 281
job prints on wrong paper 281
jobs do not print 277
Large jobs do not collate 282
multiple‑language PDF files do not
print 276
paper curl 289
paper frequently jams 275
print job takes longer than
expected 280
tray linking does not work 282
unexpected page breaks
occur 283
printer 46
basic model 11
finishing features 75
fully configured 11
minimum clearances 10
moving 10, 233, 234
selecting a location 10
shipping 234
printer configurations 11
printer control panel 15
adjusting brightness 216
factory defaults, restoring 237
indicator light 15
Sleep button light 15
printer control panel, virtual
display
using the Embedded Web
Server 235
Printer had to restart. Last job may
be incomplete. 264
printer hard disk
disposing of 219
encrypting 221
installing 39
removing 42
wiping 220
printer hard disk encryption 221
printer hard disk memory
erasing 220
printer information
where to find 9
printer IP address
finding 20
printer is printing blank pages 284
printer messages
[x]-page jam, remove all pages
from the output bin. Leave paper
in bin. [45y.xx] 249
[x]‑page jam, clear manual feeder.
[25y.xx] 247
[x]‑page jam, clear standard bin.
[20y.xx] 241
[x]‑page jam, open automatic
feeder top cover. [28y.xx] 240
[x]‑page jam, open front door.
[20y.xx] 243
[x]‑page jam, open rear door.
[20y.xx] 241
[x]‑page jam, open tray [x].
[24y.xx] 248
[x]‑page jam, remove tray 1 to
clear duplex. [23y.xx] 246
Cartridge low [88.xy] 255
Cartridge nearly low [88.xy] 255
Cartridge very low, [x] estimated
pages remain [88.xy] 255
Change [paper source] to [custom
string] load [orientation] 255
Change [paper source] to [custom
type name] load
[orientation] 255
Change [paper source] to [paper
size] load [orientation] 255
Change [paper source] to [paper
type] [paper size] load
[orientation] 256
Check tray [x] connection 256
Close finisher rear door 256
Close flatbed cover and load
originals if restarting job
[2yy.xx] 257
Close front door 256
Close rear door 256
Complex page, some data may not
have printed [39] 257
Configuration change, some held
jobs were not restored [57] 257
Defective flash detected [51] 257
Disk full 62 257
Disk must be formatted for use in
this device 258
Disk near full. Securely clearing
disk space. 258
Error reading USB drive. Remove
USB. 258
Error reading USB hub. Remove
hub. 258
Fax memory full 258
Fax partition inoperative. Contact
system administrator. 258
Fax server 'To Format' not set up.
Contact system
administrator. 258
Fax Station Name not set up.
Contact system
administrator. 258
Fax Station Number not set up.
Contact system
administrator. 259
Imaging unit low [84.xy] 259
Imaging unit nearly low
[84.xy] 259
Imaging unit very low, [x]
estimated pages remain
[84.xy] 259
Incompatible tray [x] [59] 259
Incorrect paper size, open [paper
source] [34] 259
Insufficient memory for Flash
Memory Defragment operation
[37] 260
Insufficient memory to collate job
[37] 260
Insufficient memory to support
Resource Save feature [35] 260
Insufficient memory, some Held
Jobs were deleted [37] 260
Insufficient memory, some held
jobs will not be restored
[37] 260
Load [paper source] with [custom
string] [paper orientation] 261
Index 341
To Next Page
Loading...
