Lexmark XM3150 Compatibility Guide

Die ‑ cut labels are cut with a non‑print area between each label. For best results, do not print within 2.3 mm (0.090 in.)
of the edge of the label, of the perforations, or of the die‑cuts of the label.
If you are using a butt cut or die‑cut label, then make sure adhesive contamination does not occur. Labels use varying
levels and types of adhesive, as well as a variety of liner materials and facestock papers. Adhesive can ooze from all
label stocks. Make sure die‑cuts are free of adhesive stringers. To prevent adhesive contaminations, use zone coating
or pattern adhesive with a non‑adhesive border of about 1‑mm (0.04‑in.) or larger.
If zone coating is not used, then we recommend a stripped edge matrix. The stripped edge matrix varies with the type
of face stock, liner, and adhesive materials. See the following table for stripped edge matrix guidelines. Measurements
may vary ±0.5 mm.
Stripped edge matrix guidelines
Face type Total weight of label Edge matrix removal Location of strip
Paper* (cut sheet or
dual web)
140–180 g/m
2
1.6 mm (0.0625 in.)
1.6 mm (0.0625 in.)
215.9 mm (8.5 in.) at leading edge
279.4 mm (11 in.) at driver edge
Vinyl
265–300 g/m
2
1.6 mm (0.0625 in.)
1.6 mm (0.0625 in.)
215.9 mm (8.5 in.) at leading edge
279.4 mm (11 in.) at driver edge
Polyester and other
face materials
Varies 1.6 mm (0.0625 in.)
1.6 mm (0.0625 in.)
215.9 mm (8.5 in.) at leading edge
279.4 mm (11 in.) at driver edge
* Use a non‑oozing adhesive.
Using cut sheet labels with adhesive applied to the edge of the sheet will contaminate your printer and your cartridge
and could void your printer and cartridge warranties.
When using pressure‑sensitive materials without zone coating, choose butt cut labels without any stringers and with
a stripped edge matrix. If a total strip matrix is in the design for the final product, then print before removing the matrix.
If the matrix must be removed before printing, then round all corners and make sure adhesive is not exposed.
The following diagram shows a recommended label design for Optra plus printers, 4039, 4029, and 4019, as well as the
T610, T520, T620, and T630 laser printers.
Note: The non‑print area may vary, depending on the printer model.
Labels 26

Lexmark XM3150 Specifications

General

Duplex printing	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	6.5 s
Print speed (black, normal quality, A4/US Letter)	47 ppm
All-in-one functions	Copy, Fax, Print, Scan
Color all-in-one functions	Scan
Digital sender	No
Maximum duty cycle	150000 pages per month
Recommended duty cycle	2000 - 15000 pages per month
Copier resize	25 - 400 %
Maximum copy resolution	- DPI
Copy speed (black, normal quality, A4)	47 cpm
Scan speed (black)	48 ppm
Scan speed (color)	32 ppm
Duplex scan speed (black)	21 ppm
Duplex scan speed (color)	14 ppm
Optical scanning resolution	600 x 1200 DPI
Faxing	Mono faxing
Modem speed	33.6 Kbit/s
Total input capacity	650 sheets
Total output capacity	250 sheets
Maximum input capacity	2300 sheets
Multi-Purpose tray input capacity	100 sheets
Envelopes sizes	7 3/4, 9, 10, DL
Maximum print size	216 x 356 mm
Paper tray media types	Card stock, Envelopes, Labels, Plain paper, Transparencies
Non-ISO print media sizes	Executive (184 x 267mm), Folio (media size), Legal (media size), Letter (media size), Oficio (media size)
ISO A-series sizes (A0...A9)	A4, A5, A6
JIS B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Display	LCD
Control type	Touch
Product color	Grey, White
Display diagonal	7 \
Market positioning	Business
Direct printing	-
Standard interfaces	Ethernet, USB 2.0
Optional connectivity	Parallel, Serial (RS-422), Wireless LAN
Internal memory	1024 MB
Maximum internal memory	3072 MB
Sound pressure level (copying)	56 dB
Sound pressure level (printing)	55 dB
Power consumption (average operating)	- W
Operating altitude	0 - 2896 m
Operating temperature (T-T)	16 - 32 °C
Operating relative humidity (H-H)	8 - 80 %
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	479 mm
Width	499 mm
Height	561 mm
Weight	23600 g