EasyManuals Logo

Lexmark XM3150 Compatibility Guide

Lexmark XM3150
179 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #80 background imageLoading...
Page #80 background image
Media specifications
Labels Thickness: 0.102–0.305 mm (0.004–0.012 in.)
Smoothness: 100–400* Sheffield
*150–250 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation.
Card stock Weight:
Up to 199 g/m
2
Index Bristol (110 lb)
Up to 203 g/m
2
Tag (125 lb)
Up to 176 g/m
2
Cover (65 lb)
Card stock and label guidelines
Labels are one of the most difficult print materials for laser printers. A special fuser cleaner should be used for label
applications to optimize feed reliability.
Printing labels on the Lexmark MS710 and MS711 requires a special label fuser cleaner that prevents duplexing.
It is recommended that when you run labels, you install a special oil fuser cleaner, P/N 40X8579. When you order a
new cartridge, make sure the cartridge includes the correct fuser cleaner.
It is possible to duplex certain labels that have been specifically designed for this application. To duplex labels, consult
the Lexmark "Converter Lists" to see which converters have successfully developed this type of label, and you must
install a special fuser wiper. The wax wiper that is used with the Lexmark MS710 and MS711 is P/N 40X8581. Cartridges
designed for duplex label printing contain two wax wipers. Change the wax wiper at the halfway point of your normal
cartridge usage to provide additional cleaning and optimize performance. Contact your Supplies and Label Specialist
for information on oil and wax vinyl label cartridges.
Note: Wax wipers are not recommended when using vinyl labels.
Tray fill line information
Depending on construction, labels and card stock can sometimes be difficult to pick and feed reliably. Performance can
be improved by controlling the number of sheets of media loaded in the tray. There are two fill lines in the tray. The
solid line is the maximum paper fill indicator. No media should be loaded in the tray above this line or paper jams could
occur. The dashed line is the alternate paper fill indicator and should be used if any feed or reliability issues are noted
with specialty media, including labels and card stock. If paper jams occur when completely filling the tray, load the
specialty media only up to the alternate paper fill indicator.
Printer specifications 80

Table of Contents

Other manuals for Lexmark XM3150

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark XM3150 and is the answer not in the manual?

Lexmark XM3150 Specifications

General IconGeneral
Duplex printingYes
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Time to first page (black, normal)6.5 s
Print speed (black, normal quality, A4/US Letter)47 ppm
All-in-one functionsCopy, Fax, Print, Scan
Color all-in-one functionsScan
Digital senderNo
Maximum duty cycle150000 pages per month
Recommended duty cycle2000 - 15000 pages per month
Copier resize25 - 400 %
Maximum copy resolution- DPI
Copy speed (black, normal quality, A4)47 cpm
Scan speed (black)48 ppm
Scan speed (color)32 ppm
Duplex scan speed (black)21 ppm
Duplex scan speed (color)14 ppm
Optical scanning resolution600 x 1200 DPI
FaxingMono faxing
Modem speed33.6 Kbit/s
Total input capacity650 sheets
Total output capacity250 sheets
Maximum input capacity2300 sheets
Multi-Purpose tray input capacity100 sheets
Envelopes sizes7 3/4, 9, 10, DL
Maximum print size216 x 356 mm
Paper tray media typesCard stock, Envelopes, Labels, Plain paper, Transparencies
Non-ISO print media sizesExecutive (184 x 267mm), Folio (media size), Legal (media size), Letter (media size), Oficio (media size)
ISO A-series sizes (A0...A9)A4, A5, A6
JIS B-series sizes (B0...B9)B5
Maximum ISO A-series paper sizeA4
DisplayLCD
Control typeTouch
Product colorGrey, White
Display diagonal7 \
Market positioningBusiness
Direct printing-
Standard interfacesEthernet, USB 2.0
Optional connectivityParallel, Serial (RS-422), Wireless LAN
Internal memory1024 MB
Maximum internal memory3072 MB
Sound pressure level (copying)56 dB
Sound pressure level (printing)55 dB
Power consumption (average operating)- W
Operating altitude0 - 2896 m
Operating temperature (T-T)16 - 32 °C
Operating relative humidity (H-H)8 - 80 %
Sustainability certificatesENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth479 mm
Width499 mm
Height561 mm
Weight23600 g

Related product manuals