STARTING AND DRIVING
272
LEXUS NIGHT VIEW SYSTEM
31X521
The Lexus night view system can help you see forward
when driving at night. If pedestrians or objects are
detected within the area reaching the tip of the low beam
to high beam, they are displayed along with the layout of
the road in the windshield as a monochrome image.
CAUTION
D This system should be used as a supplemental aid to
help you see objects. Never depend on this system
only. Be sure to view objects with your own eyes
while driving.
D This system is designed to help you see objects
better when driving in a flat area with few curves in
darkness. Use of this function in an area with many
curves or slopes or in a well−lit area could cause an
accident.
Turning on the system
31x522b
The Lexus night view system turns on and the “MAIN”
indicator light comes on when you push the knob with the
ignition switch on:
When the system is turned on in the following conditions, the
head−up display (night view display) shutter opens
automatically and the image sent from the head−up display is
shown on the windshield.
D It is dark outside.
D The headlights are on.
When the vehicle starts moving in this condition, the “BEAM”
indicator light comes on, the near−infrared floodlight (night
view projector) is irradiated, and the image of the road ahead
is shown on the windshield.
You can adjust the brightness by turning the knob.
To Next Page
Loading...
