IN CASE OF AN EMERGENCY
347
40X010a
Before putting on the wheel, remove any corrosion on
the mounting surfaces with a wire brush or such.
Installation of wheels without good metal−to−metal
contact at the mounting surface can cause wheel nuts to
loosen and eventually cause a wheel to come off while
driving. Therefore after the first 1600 km (1000 miles),
check to see that the wheel nuts are tight.
40X011c
8. Reinstall all the wheel nuts finger tight.
Reinstall the wheel nuts and tighten them as much as
you can by hand. Press the tire back and see if you can
tighten them more.
CAUTION
Never use oil or grease on the bolts or nuts. Doing
so may lead to overtightening the nuts and
damaging the bolts. The nuts may loosen and the
wheels may fall off, which could cause a serious
accident. If there is oil or grease on any bolt or nut,
clean it.
To Next Page
Loading...
