INTERIOR EQUIPMENT
77
The battery side of the hand−held transmitter must be pointed
away from the HomeLink
R
during the programming process.
For Canadian users, follow the procedure in “Programming an
entrance gate/Programming all devices in the Canadian
market”.
1. Decide which of 3 HomeLink
R
buttons you want to program.
14x607
"
1
HomeLink
R
2
Hand−held garage transmitter
3
25 to 75 mm (1 to 3 in.)
2. Place your hand−held garage transmitter 25 to 75 mm (1 to
3 in.) away from the surface of the HomeLink
R
.
Keep the indicator light on the HomeLink
R
in view while
programming.
14x608
3. Simultaneously press and hold the hand−held garage
transmitter button along with the selected HomeLink
R
button.
Do not release the buttons until step 4 has been completed.
4. When the indicator light on the HomeLink
R
changes from a
slow to a rapid flash after 20 seconds, you can release both
buttons.
To Next Page
Loading...
