12
1-2. Opening, closing and locking the doors and trunk
n If the smart access system with push-button start does not operate properly
l Locking and unlocking the doors and trunk: Use the mechanical key.
(→P. 4 86)
l Starting the engine: →P. 4 87
n When the electronic key battery is fully depleted
→P. 4 09
n Customization
Settings (e.g. smart access system with push-button start, anti-theft system) can be
changed. (→P. 52 3)
n Certification for the smart access system with push-button start
For vehicles sold in the U.S.A.
NOTE:
This device complies with Part 15 of the FCC Rules. Operation is subject to the fol-
lowing two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
FCC WARNING:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Alarm Situation Correction procedure
Interior alarm rings
continuously
Switched to “ACC” mode
while the driver's door is
open (Opened the driver's
door when the engine switch
is in “ACC” mode.)
Turn the engine switch
“OFF” and close the
driver's door.
Turned the engine switch
“OFF” while the driver's door
is open
Close the driver's door.
To Next Page
Loading...
