19
1-2. Opening, closing and locking the doors and trunk
1
Before driving
n Setting and canceling the functions
To switch between setting and canceling, follow the procedure below:
Close all the doors and switch the engine switch to “IG-ON”
mode. (Perform step 2 within 10 seconds.)
Shift the shift lever to “P” or “N”, press and hold the driver's door
lock switch ( or ) for 5 seconds then release.
The shift lever and switch positions corresponding to the desired func-
tion to be set or canceled are shown as follows.
When the setting or canceling operation is complete, all doors are locked
and then unlocked.
STEP 1
Function Shift lever position Switch position
Shift position linked door locking
function
“P”
Shift position linked door unlock-
ing function
Speed linked door locking function
“N”
Driver's door linked door unlocking
function
To Next Page
Loading...
