28
1-3. Adjustable components
Linking driving position memory with door unlock operation (driver
side only)
Memorized driving positions can be recalled when you unlock the
driver’s door using the entry function or wireless remote control and
open the driver’s door. Steering wheel position is recalled when the
engine switch is set to the “IG-ON” mode.
n Setting the linked door unlock operation
Set the driving positions into the memory system using the “1”, “2”
or “3” buttons on the driver’s side. (→P. 27)
Turn the engine switch to the “OFF” mode, then close the driver’s
door.
Push the “1”, “2” or “3” button on
the driver’s side and the button
on the wireless remote control at
the same time for about 1 second
until you hear a beep.
n Recalling the memorized position
Check that the shift lever is set in “P”.
Switch to “IG-ON” mode.
Push button “1”, “2” or “3” to
recall the desired position.
STEP 1
STEP 2
STEP 1
STEP 2
STEP 3
To Next Page
Loading...
