204
3-3. Using the audio system
n Scanning all radio stations within range
AM station
To u c h on the screen or press .
“SCAN” appears on the screen and all stations with reception will be
played for a few seconds each.
When the desired station is reached, touch or press
once again.
FM station
Press .
“SCAN” appears on the screen and all stations with reception will be
played for a few seconds each.
When the desired station is reached, press the button once again.
RDS (Radio Data System)
This feature allows your radio to receive station identification information
and program information (classical, jazz, etc.) from radio stations which
broadcast this information.
n Receiving RDS broadcasts
Touch or on the
screen.
STEP 1
STEP 2
STEP 1
STEP 1
To Next Page
Loading...
