206
3-3. Using the audio system
n Traffic announcement
Touch on the screen.
“TRAF SEEK” appears on the dis-
play, and the radio will start seeking
any station broadcasting traffic
program information.
If no traffic program station is
found, “NOTHING” appears on
the display.
XM
®
Satellite Radio (if equipped)
n Receiving XM
®
Satellite Radio
Press until “SAT” appears
on the screen.
The display changes as follows
each time the switch is pressed.
AM → SAT1 → SAT2 → SAT3
Turn the dial to select a desired channel from all the catego-
ries or press ∧ or ∨ on to select a desired channel in the
current category.
n Presetting XM
®
Satellite Radio channels
Select the desired channel. Touch one of the preset stations (1 - 6) and
hold it until you hear a beep.
n Changing the channel category
To u c h or on the screen.
STEP 1
STEP 2
To Next Page
Loading...
