381
4-3. Do-it-yourself maintenance
4
Maintenance and care
n Engine oil consumption
l The amount of engine oil consumed depends on the oil viscosity, the quality of
the oil and the way the vehicle is driven.
l More oil is consumed under driving conditions such as high speeds and fre-
quent acceleration and deceleration.
l A new engine consumes more oil.
l When judging the amount of oil consumption, keep in mind that the oil may
have become diluted, making it difficult to judge the true level accurately.
l Oil consumption: Max. 1.1 qt./600 miles, 0.9 lmp.qt./600 miles (1.0 L per 1000
km). If the vehicle consumes more than this amount, contact your Lexus dealer.
n Resetting the engine oil maintenance data (U.S.A. only)
Perform the following steps:
Press the “DISP” switch (→P. 114) to change the multi-information display
to blank.
Turn the engine switch to “OFF” mode.
Turn the engine switch to “IG-ON” mode with the trip meter reset button
held down.
Keep pressing the button for longer than 7 seconds after the engine
switch is in “IG-ON” mode.
STEP 1
STEP 2
STEP 3
STEP 4
After the above operation, the message
shown in the left will appear on the display.
The master warning light and tone will turn
on. After 5 seconds, the system reset is com-
pleted.
To Next Page
Loading...
