366
3-7. Other interior features
GS_G_U
March 29, 201
0 3:11 pm
n Programming an entry gate (for U.S.A. o
wners)/Programming all
devices in the Canadian market
Place your transmitter 1 to 3 in. (25 to 75 mm) away from the sur-
face of the HomeLink
®
.
Keep the indicator light on the HomeLink
®
in view while programming.
Press and hold the selected HomeLink
®
button.
Repeatedly press and release (cycle) the device’s remote control
button for two seconds each until step 4 is completed.
When the indicator light on the HomeLink
®
compatible trans-
ceiver starts to flash rapidly, release the buttons.
Test the operation of the HomeLink
®
by pressing the newly pro-
grammed button. Check to see if the gate/device operates cor-
rectly.
Repeat the steps above to program another device for each of
the remaining HomeLink
®
buttons.
n Programming other devices
To program other devices such as home security systems, home door
locks or lighting, contact your authorized Lexus dealer for assistance.
n Reprogramming a button
The individual HomeLink
®
buttons cannot be erased but can be
reprogrammed. To reprogram a button, follow the “Basic program-
ming” instructions.
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
To Next Page
Loading...
