480
5-1. Essential information
GS_G_U
March 29, 201
0 3:11 pm
Installing towing eyelet
Remove the eyelet cover using a
flathead screwdriver.
To protect the bodywork, place a
rag between the screwdriver and
the vehicle body, as shown in the
illustration.
Insert the towing eyelet into the
hole and tighten partially by hand.
Tighten down the towing eyelet
securely using a wheel nut wrench.
STEP 1
STEP 2
STEP 3
n Location of the emergency towing eyelet
→P. 512
To Next Page
Loading...
