Topic 2
Before Driving
14
Entering and Exiting
Before Driving When Driving
Rain and
Night Driving
Driving Comfort
Opening and Closing
What to do if ...
Customizing
Yo u r L e x u s
Driving Position Memory System (If Equipped)
n Setting memory positions
While holding the “SET” button, press and hold
one of the memory buttons (“1”, “2”, or “3”) until
you hear a beep.
The current position of the driver’s or front pas-
senger’s seat, and the outside rear view mirror
and steering wheel (driver’s side switch only) are
stored.
n Recalling memory positions
Press one of the memory buttons (“1”, “2”, or “3”).
n Linking driving position memory with door unlock operation
(driver’s side only)
While holding the desired memory button, press
and hold button on the wireless remote con-
trol until you hear a beep.
To prevent triggering of the alarm, open one of the
doors within 60 seconds after the beep is heard.
The seats can be returned to a previously set position by simply pressing a button.
The position of the steering wheel and the outside rear view mirrors is adjusted along with the
driver’s seat.
Positions can be conveniently stored for the vehicle’s primary drivers and passengers.
Linking driving position memory to the door unlock operation allows the memory position
to be recalled automatically when the driver’s door is opened. (The linked function does not
operate if the driver’s door is unlocked using the mechanical key or manually from inside
the vehicle.)
To Next Page
Loading...
