Topic 3
When Driving
27
Dynamic Radar Cruise Control (If Equipped)
n Cruise control display
Cruise control settings are shown on the multi-
information display.
Vehicle ahead indicator
Vehicle-to-vehicle distance
Preset speed
n Vehicle-to-vehicle distance control mode
Press the “ON-OFF” button.
Accelerate or decelerate to the desired
speed, and then push the lever down.
Following distance can be adjusted using the
vehicle-to-vehicle distance control switch.
n Conventional (constant speed) cruise control mode
Press the “ON-OFF” button.
Push the lever forward and hold for at least
one second.
Accelerate or decelerate to the desired
speed, and then push the lever down.
n Adjusting the speed setting
To increase speed: push the lever up.
To d ec re a se sp ee d: push the lever down.
Release the lever when the desired speed is
reached.
n Canceling
To temporarily cancel the dynamic radar cruise
control, pull the lever.
To turn the system off, press the “ON-OFF” but-
ton.
Dynamic radar cruise control supplements conventional cruise control with a vehicle-to-
vehicle distance control mode.
1
2
3
The vehicle-to-vehicle distance control mode maintains the preset cruising speed as long
as no vehicle is detected ahead.
To Next Page
Loading...
