The system sounds the alarm and flashes lights when forcible entry is
detected.
n Triggering of the alarm
The alarm is triggered in the following situations.
l A locked door or trunk is unlocked or opened in any way other
than using the smart access system with push-button start, wire-
less remote control or mechanical key. (The doors will lock again
automatically.)
l The hood is opened while the vehicle is locked.
n Setting the alarm system
Close the doors, trunk and
hood, and lock all doors.
The system will be set automati-
cally after 30 seconds.
The indicator light changes from
being on to flashing when the
system is set.
n Deactivating or stopping the alarm
Do one of the following to deactivate or stop the alarm.
l Unlock the doors or trunk.
l Turn the “ENGINE START STOP” switch to the ACCESSORY or
IGNITION ON mode. (The alarm will be deactivated or stopped
after a few seconds.)
To Next Page
Loading...
