Lexus 2008 IS250 - Page 123

124
2-1. Driving procedures
Changing shift ranges in S mode
Shift the shift lever to the S position and operate the shift lever or shift
paddle switch.
Upshifting
Downshifting
The initial shift range in S mode is automatically set to 5 or 4 according to
vehicle speed. However, the initial shift range may be set to 3 or 2 if the
AI-SHIFT has operated while the shift lever was in the D position.
(→P. 125)
n Shift ranges and their functions
A lower shift range will provide greater engine braking forces than a higher shift
range.
Shift range Function
6
Automatically selecting gears between 1 and 6
according to vehicle speed and driving conditions.
5
Automatically selecting gears between 1 and 5
according to vehicle speed and driving conditions.
4
Automatically selecting gears between 1 and 4
according to vehicle speed and driving conditions.
3
Automatically selecting gears between 1 and 3
according to vehicle speed and driving conditions.
2
Automatically selecting gears between 1 and 2
according to vehicle speed and driving conditions.
1 Setting the gear at 1.