Lexus 2013 ES350 - Incoming Call Display

192
2. SETUP
ES350/300h_Navi_OM33A07U_(U)
12.
05.11 08:14
” On this screen, the following functions can
be operated:
” To reset all setup items, select “Default”.
1 Select “Incoming Call Display Mode”.
SCREEN FOR “Phone Display
Settings”
No. Function
Select to change the incoming call
display. (See “INCOMING CALL
DISPLAY” on page 192.)
For PBAP compatible models, se-
lect to set the display of the automat-
ic phonebook transfer completion
message to “On” or “Off”.
For PBAP compatible models, se-
lect to set the display of the automat-
ic call history transfer completion
message to “On” or “Off”.
For PBAP compatible models, se-
lect to set the display of images dur-
ing calls to “On” or “Off”.
For PBAP compatible models, se-
lect to set the orientation of images
displayed during calls. (See “RO-
TATING CONTACT IMAGES” on
page 193.)
INFORMATION
● Depending on the phone, these functions
may not be available even if the phone is
PBAP compatible.
INCOMING CALL DISPLAY
The type of incoming call display can be
selected.
Information Provided by: