132
4. SETUP
ES350/300h_Navi_OM33A07U_(U)
12.
05.11 08:14
1 Press the “MENU” button on the
Remote Touch, then select “Setup”.
2 Select “Navigation” on the “Setup”
screen.
3 Select “Detailed Navi. Settings” on the
“Navigation Settings” screen.
4 Select “Pop-up Information”.
5 Select “On” or “Off”.
6 Select “Save”.
” When “Pop-up Information” is turned off,
the following messages will not be dis-
played.
wThis message appears when the map
scale is over 0.5 miles (800 m).
wThis message appears when the map is
switched to dual map screen mode.
INFORMATION
● If this procedure is not performed when
the tires are replaced, the current posi-
tion mark may be incorrectly displayed.
POP-UP INFORMATION
When “Pop-up information” is turned
on, pop-up information will be displayed.
To Next Page
Loading...
