296
5-1. Basic Operations
IS250_EE(OM53B11E)
Input mode
Letters and numbers are inputted via the screen.
Turn the controller to select
the desired character and press
the controller to input the char-
acter.
When this indicator is shown,
you can change input fields by
moving the controller forward.
When this indicator is shown,
you can change character
types by moving the control-
ler to the right and then select-
ing the desired character type.
Select to erase characters one by one. Select and hold to erase all
characters.
Select to complete data input.
Input field mode
When in the input field you can move the cursor to the desired posi-
tion.
Turn the controller to move the
cursor left or right.
When this indicator is shown,
you can move the cursor to the
right input field by moving the
controller to the right.
When this indicator is shown,
you can move the cursor to the
left input field by moving the
controller to the left.
When this indicator is shown, you can change to input mode by
moving the controller backward.
Inputting letters and numbers
1
2
3
4
5
1
2
3
4
To Next Page
Loading...
