42
1-1. For safe use
IS250_EE(OM53B11E)
The main SRS airbag system and Pop Up Hood components are shown
above. The SRS airbag system and Pop Up Hood are controlled by the
airbag sensor assembly. As the airbags deploy, a chemical reaction in the
inflators quickly fills the airbags with non-toxic gas to help restrain the
motion of the occupants. When the Pop Up Hood is activated, a non-toxic
gas is released due to a chemical reaction in the lifters, which causes the
pistons to eject quickly and raise the rear portion of the hood. (Pop Up
Hood: P. 54)
SRS airbag system components
Pop up hood lifters
Airbag manual on-off switch
Front passenger airbag
Curtain shield airbags
Knee airbags
“PASSENGER AIR BAG”
indicator lights
Seat belt pretensioners and
force limiters
Side impact sensors (front)
Front side airbags
SRS warning light
Driver airbag
Side impact sensors (rear)
Driver’s seat position sensor
Driver’s seat belt buckle switch
Airbag sensor assembly
Front impact sensors
Pop up hood sensors
1
2
3
4
5
6
7
8
To Next Page
Loading...
