446
CT200h_OM_OM76134U_(U)
6-4. Using the other interior features
■ Programs stored in the HomeLink
®
memory
● The registered codes are not erased even if the 12-volt battery cable is disconnected.
● If learning failed when registering a different code to a HomeLink
®
button that already
has a code registered to it, the already registered code is not erased.
■ Certification for the garage door opener
For vehicles sold in the U.S.A.
For vehicles sold in Canada
■ For additional programming assistance with your HomeLink
®
Universal Transceiver
Visit on the web at www.homelink.com
or call 1-800-355-3515.
■ When programming a garage door or other remote control device
The garage door or other device may operate, so ensure people and objects are out of
danger to prevent potential harm.
■ Conforming to federal safety standards
Do not use the HomeLink
®
compatible transceiver with any garage door opener or
device that lacks safety stop and reverse features as required by federal safety stan-
dards.
This includes any garage door that cannot detect an interfering object. A door or
device without these features increases the risk of death or serious injury.
■ When operating or programming HomeLink
®
Never allow a child to operate or play with the HomeLink
®
buttons.