Lexus 2015 CT200H - Page 598

598
CT200h_OM_OM76134U_(U)
9-2. Customization
■ Reverse buzzer (P. 164)
■ Vehicle customization
● When the Speed linked door locking function and the Shift position linked door locking
function are both on, the door lock operates as follows.
• When shifting the shift position to any position other than P, all the doors will be
locked.
• If the vehicle is started with all the doors locked, the Speed linked door locking func-
tion would not operate.
• If the vehicle is started with any door unlocked, the Speed linked door locking func-
tion will operate.
● When the smart access system with push-button start is off, Smart door unlocking can-
not be customized.
● When the doors remain closed after unlocking the doors and the automatic door lock
function is activated, the signals will be generated in accordance with the operation sig-
nal (buzzer) and the operation signal (emergency flashers) settings.
■ In the following situations, customize mode in which the settings can be changed
through the “DISP” switch will automatically be turned off.
● A warning message appears after the customize mode screen is displayed.
● The power switch is turned off.
● The vehicle begins to move while the customize mode screen is displayed.
Function
Default
setting
Customized
setting
Signal (buzzer) when the
shift position is in R
Intermittent Single – – – O
WA R NI N G
■ Cautions during customization
As the hybrid system needs to be operating during customization, ensure that the vehi-
cle is parked in a place with adequate ventilation. In a closed area such as a garage,
exhaust gases including harmful carbon monoxide (CO) may collect and enter the
vehicle. This may lead to death or a serious health hazard.
NOTICE
■ During customization
To prevent 12-volt battery discharge, ensure that the hybrid system is operating while
customizing features.
1
2
3
4