EXPLANATION OF MAINTENANCE ITEMS
mAintenAnCe
Scheduled Maintenance Log68
The following descriptions are
provided to give you a better
understanding of the maintenance
services that should be performed
on your vehicle. The scheduled
maintenance log indicates at
which time/mileage intervals each
service should be performed.
Please note that many maintenance
services should be performed
only by a qualified technician.
Active Height Control System
Inspect the lines, accumulators and
pump and replace the system fluid
when specified. For recommended
fluid, refer to your Owner’s Manual.
Axle Shaft Boots
Check the axle shaft boots and
clamps for cracks, deterioration
and damage. Replace any damaged
parts and, if necessary, repack
the grease. A qualified technician
should perform these operations.
Ball Joints and Dust Covers
Check the suspension and steering
linkage ball joints for looseness and
damage. Check all dust covers
for deterioration and damage.
A qualified technician should
perform these inspections.
Body Inspection
Visually check for corrosion,
scratches and other damage. Check
outer body panels, inner panels of
the hood and doors, and underneath
the vehicle. Apply touch-up paint to
any chips and scratches or have them
repaired by a qualified technician.
Brake Fluid
Replace using fluid type specified
in your Owner’s Manual. A qualified
technician should perform this
operation.
Brake Lines and Hoses
Visually inspect for proper installation.
Check for chafing, cracks, deterioration
and signs of leakage. Replace any
deteriorated or damaged parts.
A qualified technician should perform
these operations.
For further information on
maintenance services that
you can perform yourself,
see the maintenance sections
of your Owner’s Manual.
To Next Page
Loading...
