275
2-4. Using other driving systems
2
When driving
All-wheel drive lock switch (AWD models)
■ All-wheel drive lock mode
● All-wheel drive lock mode is canceled when the brakes are applied to ensure
the ABS and VSC systems operate effectively.
● All-wheel drive lock mode is canceled when the vehicle speed exceeds 25 mph
(40 km/h).
All-wheel drive lock mode can be used when a large amount of drive power
needs to be applied to all the wheels, such as when the vehicle gets stuck in
mud and you need to free it.
Press the switch.
The torque of the engine is dis-
tributed to the rear wheels to
the maximum extent possible in
accordance with driving condi-
tions.
Pressing the switch again can-
cels all-wheel drive lock mode
and returns the active torque
control 4WD system to normal
mode. (P. 269 )
To Next Page
Loading...
