CT200h_OM_OM76197U_(U)
487
7-3. Do-it-yourself maintenance
7
Maintenance and care
Make sure that the 12-volt battery terminals are not corroded and that there are
no loose connections, cracks, or loose clamps.
Terminals
Hold-down clamp
Insert the 2 tabs on the far side of the
cover into the holes.
Hook on the 2 tabs on the near side
of the cover.
Hook on the 2 tabs on the upper
side of the cover.
Exterior
1
2
Installing the 12-volt battery maintenance cover
1
2
3
To Next Page
