111
2. Instrument cluster
2
Instrument cluster
CT200h_OM_OM76102E_(EE)
The function can be reset by pushing the “DISP” switch for longer than 1
second when the average vehicle speed is displayed.
Setting
P. 650
Display off
A blank screen is displayed
System check display
After turning the power switch to ON mode, opening image is displayed while
system operation is checked. When the system check is complete, the normal
screen will return.
When disconnecting and reconnecting 12-volt battery terminals
The drive information will be reset.
Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is charac-
teristic of liquid crystal displays, and there is no problem continuing to use the
display.
The multi-information display at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal
information display. At extremely low temperatures, the information display
monitor may respond slowly, and display changes may be delayed.
To Next Page
Loading...
