345
5-9. Bluetooth® Phone
5
Audio system
CT200h_OM_OM76102E_(EE)
Follow the procedure below to use number stored in call history memory:
Press the off-hook switch and select “Redial” (when using a number
stored in the outgoing call history memory) or “Call back” (when using
a number stored in the incoming call history memory) using the
“TUNE•SEL” knob.
Select the desired number using the knob.
The following operations can be performed:
Dialing: Press the off-hook switch or select “Dial” using the knob.
Storing the number in the phone book: Select “Store” and then “Con-
firm” using the knob.
Deleting: Select “Delete” and then “Confirm” using the knob.
Call history
Up to 5 numbers can be stored in each of the outgoing and incoming call history
memories.
Using a call history memory
To Next Page
Loading...
