Lexus CT200h - Connecting Bluetooth Phone; Connecting a Bluetooth Phone

402
5-17. Connecting Bluetooth® (Lexus Display Audio System)
CT200h_OM_OM76102E_(EE)
Connecting a Bluetooth
®
phone
When you register a phone, auto connection will be activated. Always set
it to this mode and leave the Bluetooth
®
phone in a place where a connec-
tion can be established.
When the power switch is turned to ACCESSORY or ON mode, the sys-
tem will search for a nearby cellular phone you have registered.
The system automatically connects with the most recent phone that was
connected. The connected result is displayed.
When auto connection has failed or “Bluetooth
* power” is turned off,
you must connect the Bluetooth
®
device manually.
Go to “Bluetooth
* setup”: “MENU” button  “Setup”  “Blue-
tooth
*”
Select the device to connect.
Select “Connect all”, “Connect as a telephone” or “Connect as audio
player”.
If the desired Bluetooth
®
device is not displayed, register the device.
(P. 399)
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
 Reconnecting a Bluetooth
®
phone
If the system cannot connect due to poor signal strength with the power switch in
ACCESSORY or ON mode, the system will automatically attempt to reconnect.
If the phone is turned off, the system will not attempt to reconnect. In this case,
the connection must be made manually, or the phone must be reselected.
 Connecting a phone while Bluetooth
®
audio is playing
 Bluetooth
®
audio will stop temporarily.
 It may take time to connect.
There are two connecting methods available: automatic and manual.
Auto connection
Manual connection
1
2
3