306
5-7. Setup menu
CT200h_OM_OM76174U_(U)
■ Adding procedure
Select “Add Entry” using a voice command or the “TUNE•SEL” knob.
Use one of the following methods to input a telephone number:
Inputting a telephone number using a voice command:
STEP2-1 Select “By Voice” using a voice command or the knob.
STEP2-2 Press the talk switch, say the desired number, and select “Con-
firm” using a voice command.
Transferring data from the cellular phone:
STEP2-1 Select “By Phone” and then “Confirm” using a voice command
or the knob.
STEP2-2 Transfer the data from the cellular phone.
Refer to the manual that comes with the cellular phone for the
details of transferring data.
STEP2-3 Select the data to be registered by either of the following meth-
ods:
a. Say “Previous” or “Next” until the desired data is displayed, and
select “Confirm” using a voice command.
b. Select the desired data using the knob.
Inputting a phone number using the knob:
STEP2-1 Select “Manual Input” using the knob.
STEP2-2 Input a phone number using the knob, and press the knob again.
Input the phone number 1 digit at a time.
Selecting a phone number from outgoing or incoming call history:
STEP2-1 Select “Call History” using a voice command or the knob.
STEP2-2 Select “Outgoing” or “Incoming” using a voice command or the
knob.
STEP2-3 Select the data to be registered by either of the following meth-
ods:
a. Say “Previous” or “Go back” until the desired data is displayed,
and select “Confirm” using a voice command.
b. Select the desired data using the knob.
1
2
To Next Page
Loading...
