Lexus CT200h - Page 83

83
CT200h_QG_OM76087U_(U)
■ Programming HomeLink
®
Hold your hand-held transmitter 1 to 3
in. (25 to 75 mm) of the HomeLink
®
buttons.
Press and hold down the desired
HomeLink
®
button.
For U.S.A. owners:
While pressing the HomeLink
®
but-
ton, press and hold down the button
on the hand-held transmitter until the
indicator light changes from a slow to
a rapid flash.
For Canadian owners:
While pressing the HomeLink
®
but-
ton, repeatedly press and release
(cycle) the button on the hand-held
transmitter every 2 seconds until the
indicator light changes from a slow to
a rapid flash.
If your garage door is of the rolling code
type:
Press the training button on the motor-
head unit in your garage.
Press and hold the vehicle’s pro-
grammed HomeLink
®
button for 2 sec-
onds and release it. Repeat this step
once again.
If the door does not open, press and
release the same button once again.