126
2. Instrument cluster
GS350_300_GS F_OM_OM30J17E_(GE)
Settings display
Select to change the meter display settings. (P. 630)
The multi-information display is oper-
ated using the meter control switches.
:Switch menu
: Change displayed con-
tent, scroll up/down the
screen and move the cur-
sor up/down
Press: Enter/Set
Press and hold: Reset
Return to the previous screen
Press: Displays the screen registered to
When no screen has been registered, the drive information screen will be displayed.
Press and hold: Registers the currently displayed screen to (P. 630)
When the confirmation screen is displayed, select yes to register the screen. If the
selected screen cannot be registered, a registration failure message will be shown.
Items displayed can be switched by pressing or of the meter control
switches to select and pressing or .
■ Current fuel consumption*
1
Displays the current rate of fuel consumption
■ Average fuel economy (after reset*
2
/after start/after refuel)*
1
Displays the average fuel consumption since the function was reset, the
engine was started, and the vehicle was refueled, respectively
Use the displayed average fuel consumption as a reference.
Operating the meter control switches
Drive information
4
To Next Page
Loading...
