362
4-6. Driving tips
GS350_300_GS F_OM_OM30J17E_(GE)
Eco-friendly driving tips
◆ Using Eco drive mode
When using Eco drive mode, the torque corresponding to the accelerator
pedal depression amount can be generated more smoothly than it is in normal
conditions. In addition, the operation of the air conditioning system (heating/
cooling) will be minimized, improving the fuel economy. (P. 333)
◆ Use of Eco Driving Indicator
GS350/GS300: The Eco-friendly driving is possible by keeping the bar dis-
play of the Eco Driving Indicator shown in the multi-information display within
the Zone of Eco driving. (P. 102)
GS F: The Eco-friendly driving is possible by keeping the Eco Driving Indica-
tor Light on. (P. 103)
◆ Accelerator pedal/brake pedal operation
Drive your vehicle smoothly. Avoid abrupt acceleration and deceleration.
Gradual acceleration and deceleration will help reduce excessive fuel con-
sumption.
◆ When braking
Observe conditions in front of and around the vehicle, and estimate your
stopping position. Release the accelerator pedal early and continue coasting.
Use the brake pedal to adjust your stopping position. Make sure to operate
the brake pedal gently.
◆ Delays
Repeated acceleration and deceleration, as well as long waits at traffic lights,
will lead to bad fuel economy. Check traffic reports before leaving and avoid
delays much as possible.
◆ Highway driving
Control and maintain the vehicle at a constant speed. Before stopping at a toll
booth or similar, allow plenty of time to release the accelerator pedal and gen-
tly apply the brakes.
For improved fuel economy and reduced CO
2
emissions, pay attention to the
following points:
To Next Page
Loading...
