Lexus GS200t 2016 - Engine Switch

POWER SUPPLY CHANGEOVER AND
ENGINE START/STOP
Checkforproperactivationofthe“STARTSTOP/
ENGINE”/”POWER”switch.
Powersupplychangeover
a)Carrytheelectronickeyinthevehicleandapplythe 
 parkingbrake.
b)Withoutdepressingthebrakepedal,pressthe  
 engineswitchandchangethepowersupply.
   OFF
   Pressonce:“ACCESSORY”mode
   Presstwice:“IGNITIONON”mode
   Pressthreetimes:OFF
c)Ineachmode,checkthatthepowersupplyhaschanged
 properly.
Engine start/stop
a)Carrytheelectronickeyinthevehicleandapplythe 
 parkingbrake.
b)Checkthattheshiftleverisinthe“P”position.
c)Whiledepressingthebrakepedal,pressthe“START/
 STOPENGINE”switch.
Hybrid system start/stop
a)Carrytheelectronickeyinthevehicleandapplythe 
 parkingbrake.
b)Checkthattheshiftleverisinthe“P”position.
c)Whiledepressingthebrakepedal,pressthe“POWER”
 switch.
d)Checkthatthe“READY”indicatorisilluminated.
e)Pushthe“POWER”switch(regardlessofwhetherbrake
 pedalisdepressedornot)tostopthehybridsystem.
NOTE:
Ifthehybridsystemisstoppedwiththeshiftleverina
positionotherthan“P”thepowersupplymodeisswitched
to“ACCESSORY”mode,nottoOFF,andthebatterywill
deplete.
Hybridvehicles;gasolinesimilar
1
2
3
9
GS200t/350/450h/F
INSPECTION DETAILS - B. LOCKS AND LIGHTS