Lexus GS200t 2016 - Driving Position Memory System

DRIVING POSITION MEMORY SYSTEM
a)Setdrivingposition:WiththeengineswitchinONmode
 andtheshiftleverinthe“P”position,checktheoperation:
  1.Adjustthedriver’sseat,steeringwheel,outside
   rearviewmirrorsandHUD*tothedesiredpositions.
  2.Whilepressingthe“SET”button,pressbutton“1,”“2”
   or“3”untilthebuzzersounds.
  3.Checkallbuttons(1,2and3)tomakesurethatall 
   memorizedsettingsoperatecorrectly.
b)Registersetdrivingpositionstoakey:Withtheshift
 leverinthe“P”position,closethedriver’sdoorandturn
theengineswitchtoONmode.
  1.Registeradrivingpositiontothebutton“1”,“2”or“3.”
  2.Donotcarrymorethanonekey(includingacard 
   key*)whenregistering.Whilepressingthebutton“1,”
   “2”or“3,”pressthedriver’sdoorlockswitch(either 
   lockorunlockswitch)untilasignalbeeps.
  3.Unlockthedriver’sdoorusingtheentryfunctionor 
   wirelessremotecontrol,openthedriver’sdoor,and 
   checkthatthestoreddrivingpositionisrecalled.
c)Powereasyaccesssystem
 Checkthatthesteeringwheelanddriverseat
 automaticallyadjusttoallowthedrivertoenterandexit
 thevehicleeasily.
*Ifequipped
16
GS200t/350/450h/F
INSPECTION DETAILS - C. LEFT FRONT