COMFORT ADJUSTMENT
183
1. Adjust the driver’s seat , tilt and telescopic steering
and outside rear view mirrors to the desired position.
2. While pushing the ”SET” button, push button ”1” or
”2” until the signal beeps.
The beep sound means that the positions are recorded in the
computer’s memory.
By repeating these two steps and pressing the remaining
button, the driving position for another driver can be
recorded.
To set a new memorized position, select the desired position
and perform step 2. The previous memory will be erased and
the new position will be set.
To make only slight changes to an already memorized
position, the easiest way is to first activate the memorized
position, then make the desired changes and perform step 2
above.
Activating a memorized position
16G065
When you push button ”1” or ”2”, the driving position will
be automatically adjusted to the position recorded for that
button.
To Next Page
Loading...
