ELECTRICAL COMPONENTS
418
Adding distilled water
(Maintenance type battery only)
64L062
1
Low
2
O.K.
1. Remove the vent plugs.
2. Add distilled water to cells needing fluid.
If the side of your battery is covered, check the water level by
looking down directly above the cell as illustrated above.
3. Retighten the vent plugs securely.
NOTICE
Do not overfill the cells. Excess electrolyte could
squirt out of the battery during heavy charging,
causing corrosion or damage.
Use a cover on the battery for longer life.
To Next Page
Loading...
