150
2-4. Using other driving systems
Warning beep volume and touch screen settings
You can change the warning beep volume and touch screen operating
conditions.
Push to display the “Information” screen. Then touch .
■ Changing the warning beep volume
Touc h .
Adjust the beep volume, then touch .
■ Changing the touch screen operating conditions
Touc h .
Set one of the following operating condition, then touch .
● : Displays when the sensors detect an obstacle.
● : Displays if maneuvers are required to avoid an obstacle (if
an obstacle is likely to come within 0.8 ft. [25 cm] of the vehicle).
● : Does not display the intuitive parking assist detection
screen.
When an obstacle is detected while the rear view monitor is in use, the warn-
ing indicator will appear in the top right
of the screen even has been
selected.
STEP 1
STEP 2
STEP 1
STEP 2
To Next Page
Loading...
