183
3-1. Using the touch screen
3
Interior features
•Distance
Displays the total distance since the engine was stared or the function
was reset.
■ Resetting the data
Touc hing will reset the “Average Speed” and “Distance”.
■ To avoid damaging the touch screen
● Touch the screen lightly with your finger. If there is no response, remove your fin-
ger from the screen and try again.
● Remove any dirt on the screen by wiping with a soft cloth. Do not use detergent.
■ When using the touch screen
● If the screen is cold, the display may be dark, or the system may seem to be
operating slightly slower than normal.
● The screen may seem dark and hard to see when viewed through sunglasses.
Change your angle of viewing, or remove your sunglasses.
To Next Page
Loading...
