TOUCH SCREEN
221
Initial screen
G18001
When you select the engine switch in “ACC” or “IG−ON” mode,
the initial screen appears and the system begins operating.
After a few seconds, the initial screen disappears.
CAUTION
When the vehicle is stopped with the engine running,
always apply the parking brake for safety.
Touch switch operation
This system is operated mainly by the switches on the screen.
To prevent damage to the screen, lightly touch switches on the
screen with your finger. When you touch a switch on the
screen, a beep sounds.
Do not use objects other than your finger to touch the screen.
INFORMATION
If the system does not respond to a touch of a switch,
move your finger away from the screen and then
touch it again.
You cannot operate dimmed switches.
Wipe off fingerprints on the surface of the display
using a glass cleaning cloth.
The displayed image may become darker and moving
images may be slightly distorted when the display is
cold.
When you look at the screen through polarized
material such as polarized sunglasses, the screen
may be dark and hard to see. If so, change the angle
of the screen or take off your sunglasses.
To Next Page
Loading...
