AIR CONDITIONING
265
G21005a
Driver side setting
Passenger side setting
Mixed setting
SETTING OPERATION—manual control
When one of the manual control switches is depressed
while operating in automatic mode, the mode relevant to
the depressed switch is set. Other conditions continue to
be adjusted automatically.
If manual air flow selection is desired—
G21006
The outlets from which air is delivered can be selected
manually by touching the switch. The function of each mode
is as follows:
1
Panel—Air flows mainly from the instrument panel vents
and rear vents.
2
Bi−level—Air flows from the floor vents, the instrument
panel vents and rear vents.
When you set the temperature selector setting at about
the middle in automatic operation, warm air flows out of
the floor vents and relatively low−temperature air flows
out of the instrument panel vents and rear vents.
To Next Page
Loading...
