Lexus GS430 - Page 555

ENGINE
531
1. To get a correct reading, the vehicle should be on level
ground. After turning off the engine, wait a few minutes for the
oil to drain back into the bottom of the engine.
2. Pull the dipstick out, hold a rag under the end and wipe it
clean.
3. Reinsert the dipstick and push it in as far as it will go, or the
reading will not be correct.
G62006
GS430
1
Add oil
2
O.K.
3
Too full
G62005
GS300 (two−wheel drive models)
1
Add oil
2
O.K.
3
Too full