TURN SIGNAL, HEADLIGHT, HIGH BEAM*,
FOG LIGHTS AND EMERGENCY FLASHER
INDICATOR LIGHTS
a ) Check that the turn signal indicator lights on the
instrument panel illuminate when the turn signal lever is
moved up or down.
Right turn
Left turn
Move and hold the lever part way to signal a lane
change (Right)
Move and hold the lever part way to signal a lane
change (Left)
b ) Check that the headlight or tail light indicator light
illuminates when the headlight switch is on.
Turn off the daytime running light system.
The headlights and side marker, parking, tail,
license plate and instrument panel lights turn on and
off automatically. (When the “ENGINE” switch is
in “IG-ON” mode.)
The side marker, parking, tail, license plate and
instrument panel lights turn on.
The headlights and all lights listed above turn on.
NOTE:
• Headlights automatically turn off 30 seconds after
the “ENGINE” switch is turned to the ACCESSORY
mode or turned off and the driver’s door is opened
and closed.
• When only the tail lights come on, the lights
automatically turn off with the driver’s door opened
and the “ENGINE” switch turned to the
ACCESSORY mode or turned off.
c ) Check operation of the automatic light control function.
d ) Check that the high beam indicator light illuminates
when the high beams are on.
With the headlights on, push the lever forward to
turn on the high beams.
Pull the lever toward you and release it to fl ash the
high beams once.
1
2
3
4
1
2
3
4
1
2
* If equipped
17
GX 460
INSPECTION DETAILS - B. LOCKS AND LIGHTS
To Next Page
Loading...
