379
4-5. Using the driving support systems
4
Driving
GX460_OM_OM60R28E_(GE)
■ The Crawl Control can be operated when
● The shift lever is in any gear other than P or N.
● The four-wheel drive control switch is in L4.
● The driver’s door is closed.
■ Automatic system cancelation
In the following situations, the system is canceled automatically:
At that time, the buzzer will sound, the slip indicator turns off, and the Crawl Control indi-
cator flashes.
A notification will be displayed on the multi-information display for several seconds.
(P. 558)
● When the shift lever is moved to P or N.
● When the four-wheel drive control switch is in H4.
● When the driver’s door is opened.
When turning off Crawl Control while traveling, stop the vehicle before the Crawl Con-
trol indicator turns off, or drive extremely carefully.
■ Function limit
● In the following situations, you will be able to use brake control to drive downhill at a
fixed low speed, but you will be unable to use engine control to drive uphill at a fixed low
speed.
• When the driving mode is set to second start mode.
• When the vehicle speed is higher than 10 km/h (6 mph).
● When the vehicle speed is higher than 25 km/h (15 mph), engine control and brake
control will stop temporarily. At that time, the Crawl Control indicator flashes.
To Next Page
Loading...
