88
2. Instrument cluster
GX460_OM_OM60R28E_(GE)
● Current fuel consumption (bar type)
Displays the current rate of fuel consumption.
● Average fuel consumption (after reset*
2
/after start/after refuel)*
1
Displays the average fuel consumption since the function was reset, the
engine was started, and the vehicle was refueled, respectively.
● Average vehicle speed (after reset*
2
/after start)
Displays the average vehicle speed since the function was reset and the
engine was started, respectively.
● Elapsed time (after reset*
2
/after start)
Displays the elapsed time since the function was reset and the engine was
started, respectively.
● Distance (driving range)
Displays the estimated maximum distance that can be driven with the quantity
of fuel remaining.
• This distance is computed based on your average fuel consumption.
As a result, the actual distance that can be driven may differ from that dis-
played.
• When only a small amount of fuel is added to the tank, the display may not
be updated.
When refueling, turn the engine switch off. If the vehicle is refueled without
turning the engine switch off, the display may not be updated.
*
1
: Use the displayed average fuel consumption as a reference.
*
2
: The function can be reset by pressing for longer than 1 second when the item to
reset is displayed. If there is more than one item that can be reset, the item selection
screen will appear.
Drive information
To Next Page
Loading...
