456
GX460_OM_OM60U05U_(U)
5-5. Using the other interior features
■ Codes stored in the HomeLink
®
memory
● The registered codes are not erased even if the battery cable is disconnected.
● If learning failed when registering a different code to a HomeLink
®
button that already
has a code registered to it, the already registered code will not be erased.
■ Before programming
● Install a new battery in the transmitter.
● The battery side of the transmitter must be pointed away from the HomeLink
®
.
■ When programming a garage door or other remote control device
The garage door or other device may operate, so ensure people and objects are out of
danger to prevent potential harm.
■ Conforming to federal safety standards
Do not use the HomeLink
®
compatible transceiver with any garage door opener or
device that lacks safety stop and reverse features as required by federal safety stan-
dards.
This includes any garage door that cannot detect an interfering object. A door or
device without these features increases the risk of death or serious injury.
■ When operating or programming HomeLink
®
Never allow a child to operate or play with the HomeLink
®
buttons.
To Next Page
Loading...
