158
2-4. Using other driving systems
■ To avoid damage to the vehicle
● If in the low mode, the vehicle automatically shifts to the normal mode (vehicle
height is raised) when the engine is started. Take care when overhead height is
limited.
● After unloading, the vehicle height may be slightly higher than normal. Take care
when overhead height is limited.
● Before lowering the vehicle height, check that no-one is under the vehicle and
the area is free of obstructions. Also check that the underbody of the vehicle will
not touch the ground.
● Do not select the low mode when driving on bumpy roads, as the underbody of
the vehicle may contact the road surface.
■ Avoid rapid changes to the vehicle height when the vehicle is heavily loaded
As the compressor may overheat, causing the vehicle height adjustment operation
to stop.
To Next Page
Loading...
