282
1. VOICE COMMAND SYSTEM OPERATION
GX460_Navi_OM60M79U_(U)
15.11.06 08:47
■ DISPLAYING THE “Voice Settings”
SCREENS
Selecting can be displayed the
“Voice Settings” screen.
● If the navigation system does not respond
or the confirmation screen does not dis-
appear, press the talk switch and try
again.
● If a voice command cannot be recog-
nized, voice guidance will say “Pardon?”
(“Command not recognized.” will be dis-
played on the screen) and voice com-
mand reception will restart.
● If a voice command cannot be recog-
nized 2 consecutive times, the voice
command guidance system will say
“Paused. To restart voice recognition,
push the talk switch. To cancel voice rec-
ognition, press and hold the talk switch.”
Then voice recognition will be sus-
pended.
● “Voice Recognition Prompts” can be set
to on or off on the “Voice Settings”
screen. (P. 6 2 )
● Voice guidance can be canceled by set-
ting voice prompts to off. Use this setting
when it is desirable to say a command
immediately after pressing the talk switch
and hearing a beep.
To Next Page
Loading...
