28
GX460_QG_U (OM60E77U)
■ Switching the image
Select any mode using the Multi-terrain
Select system.
Move the “ENTER” switch upwards or
downwards to select “CAM. POSI-
TION”, and press the “ENTER” switch.
The camera view can be switched by
moving the “ENTER” switch upwards or
downwards.
Each time the switch is operated, the
mark on the multi-information display
will move and the image displayed on
the monitor will switch.
Front monitor*
1
Side-front simultaneous display moni-
tor*
2
Side-rear simultaneous display moni-
tor*
2
Rear monitor*
3
*
1
: Cannot be selected if the shift lever is in R.
*
2
: The displayed icon differs in accordance with shift position.
*
3
:Cannot be selected if the shift lever is not in R.
To Next Page
Loading...
